| |
 |
| Product Facility |
Italy |
| Brand |
GMC |
| Manufacturer |
Gmc Refrigerazione Srl |
| Series |
MI-LI - Basic |
| Costruction |
- The indicators are made by embedding a spyglass directly into the body of hot forged brass EN 12420 – CW617N or in the annular indicator body of brass EN 12164 – CW614N.This forms a unique compact structure that minimizes the junctions between components, followed by removing possible leakage of refrigerant.To obtain a perfect sealing of glass in all indicators is used a modified Teflon gasket,in saddle type indicators the seal between the annular indicator and the body is done by an O-ring made of CR or HNBR. In some models, the solder connections are made of copper EN 12735-1 – Cu-DHP.The liquid and humidity indicators of the MI series are characterized by a moisture-sensitive element,whose colour changes from green to yellow depending on the humidity concentration in the system.
|
| Installation |
- During the first start,the colour of the element sensitive to moisture can be yellow,not only because of atmospheric moisture with which the indicator has come into contact but also for the presence of moisture in the circuit.When the moisture content of the refrigerant is normalized through the dehydrator filter,the colour of the element becomes green.
- The brazing of the indicators to the system shall be done with a low melting point alloy. During this process do not point the flame directly towards the body keeping it cooled in order to avoid compromising the seal of the gaskets.
|
| Note |
- Where it is necessary to tighten the ring nut (equipped with a seal) to the body indicator, use the torque specified in the instructions provided with the product in order to ensure a perfect seal and resistance to PS maximum allowable declared.
|
